A soft brake pedal means there is air or moisture in a hydraulic system that should contain neither, or fluid is escaping from it. Unlike worn pads, this is not a wear item you can monitor for a few weeks. Hydraulic faults get worse without warning, and a pedal that feels spongy today can reach…
When a car pulls when braking but tracks straight the rest of the time, the fault is in the braking system on one side, not the alignment. One wheel is generating more braking force than its opposite number, and the car turns towards it. The usual causes are a seized caliper, a collapsed flexible brake…
The clearest brake pads replacement signs are a high-pitched squeal under light braking, less than 3mm of friction material left when you look through the wheel, a pedal that travels further than it used to, and a dashboard brake wear warning. Measure rather than guess where you can, because pad thickness is the only figure…
A brakes grinding noise is almost always metal touching metal, which means the friction material is gone and the pad backing plate is cutting into the disc. Unlike a squeal, it is not a warning that replacement is approaching. It is confirmation that it is overdue. Book it this week, and in the meantime treat…
Brake pads are the replaceable friction material that clamps onto the disc, and they wear out roughly twice as fast. The brake disc is the steel rotor the pads squeeze, and it wears far more slowly but has a stamped minimum thickness it cannot go below. Pads are the routine consumable; discs are the structural…
